Fixes#635
## Changes
The implementation is complete and committed. All 211 tests pass.
## Summary of changes
### `onchain/src/Optimizer.sol`
- **Replaced raw slot inputs** with normalized indicators in `getLiquidityParams()`:
- Slot 2 `pricePosition`: where current price sits within VWAP ± 11 000 ticks (0 = lower bound, 0.5e18 = at VWAP, 1e18 = upper bound)
- Slot 3 `volatility`: `|shortTwap − longTwap| / 1000 ticks`, capped at 1e18
- Slot 4 `momentum`: 0 = falling, 0.5e18 = flat, 1e18 = rising (5-min vs 30-min TWAP delta)
- Slot 5 `timeSinceRecenter`: `elapsed / 86400s`, capped at 1e18
- Slot 6 `utilizationRate`: 1e18 if current tick is within anchor position range, else 0
- **Extended `setDataSources()`** to accept `liquidityManager` + `token0isWeth` (needed for correct tick direction in momentum/utilizationRate)
- **Added `_vwapToTick()`** helper: converts `vwapX96 = price × 2⁹⁶` to tick via `sqrt(vwapX96) << 48`, with TickMath bounds clamping
- All slots gracefully default to 0 when data sources are unconfigured or TWAP history is insufficient (try/catch on `pool.observe()`)
### `onchain/src/OptimizerV3Push3.sol`
- Updated NatSpec to document the new `[0, 1e18]` slot semantics
### New tests (`onchain/test/`)
- `OptimizerNormalizedInputsTest`: 18 tests covering all new slots, token ordering, TWAP fallback, and a bounded fuzz test
- `mocks/MockPool.sol`: configurable `slot0()` + `observe()` with TWAP tick math
- `mocks/MockLiquidityManagerPositions.sol`: configurable anchor position bounds
Co-authored-by: openhands <openhands@all-hands.dev>
Reviewed-on: https://codeberg.org/johba/harb/pulls/649
Reviewed-by: review_bot <review_bot@noreply.codeberg.org>
- evolve.sh: fix fail-in-subshell bug — run seed-gen-cli as a direct
command so its exit code is checked by the parent shell and fail()
aborts the script correctly; redirect stderr to log file instead of
discarding it with 2>/dev/null
- seed-generator.ts: reorder enumerateVariants() to put
STAKED_THRESHOLDS outermost (192 entries/block) so that
selectVariants(6) with stride=192 covers all 6 staked% thresholds;
remove false doc claim about "first variant is current seed config";
add comments explaining CI=0n is intentional in all presets
- seed-gen-cli.ts: emit a stderr diagnostic when count exceeds the
1152-variant cap so the cap is visible rather than silently producing
fewer files than requested
- test: strengthen n=6 test to assert all STAKED_THRESHOLDS values are
represented in the selected variants
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add seed-generator.ts module and seed-gen-cli.ts CLI that produce
parametric Push3 variants for initial population seeding.
Variants systematically cover:
- Staked% thresholds: 80, 85, 88, 91, 94, 97
- Penalty thresholds: 30, 50, 70, 100
- Bull params: 4 presets (aggressive → mild)
- Bear params: 4 presets (standard → very mild)
- Tax distributions: exponential (seed), linear, sqrt
Total combination space: 6×4×4×4×3 = 1152 variants.
selectVariants(n) samples evenly so every axis is represented.
evolve.sh gains --diverse-seeds flag: when set, gen_0 is seeded with
parametric variants instead of N copies of the same mutated seed.
Remaining slots (if population > generated variants) fall back to
mutations of the base seed.
All generated programs pass transpiler stack validation (33 new tests).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Three defensive layers so every Push3 program runs without reverting:
Layer A (transpiler/index.ts): assign bear defaults (CI=0, AS=0.3e18,
AW=100, DD=0.3e18) to all four outputs at the top of calculateParams.
Any output the evolved program does not overwrite keeps the safe default.
Layer B (transpiler/transpiler.ts): graceful stack underflow — dpop/bpop
return '0'/'false' instead of throwing, and the final output-pop falls
back to bear-default literals when fewer than 4 values remain on the
stack. Wrong output count no longer aborts transpilation.
Layer C (transpiler/transpiler.ts + index.ts): wrap the entire function
body in `unchecked {}` so integer overflow wraps (matching Push3), and
emit `(b == 0 ? 0 : a / b)` for every DYADIC./ (div-by-zero → 0,
matching Push3 no-op semantics).
Layer 2 (Optimizer.sol getLiquidityParams): clamp the three fraction
outputs (capitalInefficiency, anchorShare, discoveryDepth) to [0, 1e18]
after abi.decode so a buggy evolved program cannot produce out-of-range
values even if it runs without reverting.
Regenerated OptimizerV3Push3.sol with the updated transpiler; all 193
tests pass (34 Optimizer/OptimizerV3Push3 tests explicitly).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
cast call with a typed '(uint256)' selector returns output like
'140734553600000 [1.407e14]' — the numeric value followed by a
bracketed scientific-notation annotation. The cast to-dec added in the
previous review-fix commit failed on this annotated string and fell back
to echo "0", making call_recenter() always skip the VWAP-already-
bootstrapped guard and attempt the real recenter() call, which then
reverted with "amplitude not reached".
Fix: drop the cast to-dec normalisation. A plain != "0" string check
is sufficient because cast returns "0" (no annotation) for the zero
case and any non-zero annotated string is also != "0".
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Optimizer.sol: move CALCULATE_PARAMS_GAS_LIMIT constant to top of
contract (after error declaration) to avoid mid-contract placement.
Expand natspec with EIP-150 63/64 note: callers need ~203 175 gas to
deliver the full 200 000 budget to the inner staticcall.
- Optimizer.sol: add ret.length < 128 guard before abi.decode in
getLiquidityParams(). Malformed return data (truncated / wrong ABI)
from an evolved program now falls back to _bearDefaults() instead of
propagating an unhandled revert. The 128-byte minimum is the ABI
encoding of (uint256, uint256, uint24, uint256) — four 32-byte slots.
- Optimizer.sol: add cross-reference comment to _bearDefaults() noting
that its values must stay in sync with LiquidityManager.recenter()'s
catch block to prevent silent divergence.
- FitnessEvaluator.t.sol: add CALCULATE_PARAMS_GAS_LIMIT mirror constant
(must match Optimizer.sol). Disqualify candidates whose measured gas
exceeds the production cap with fitness=0 and error="gas_over_limit"
— prevents the pipeline from selecting programs that are functionally
dead on-chain (would always produce bear defaults in production).
- batch-eval.sh: update output format comment to document the gas_used
field and over-gas-limit error object added by this feature.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Optimizer.getLiquidityParams() now forwards calculateParams through a
staticcall capped at 200 000 gas. Programs that exceed the budget or
revert fall back to bear defaults (CI=0, AS=30%, AW=100, DD=0.3e18),
so a bloated evolved optimizer can never OOG-revert inside recenter().
- FitnessEvaluator.t.sol measures gas used by calculateParams against
fixed representative inputs (50% staked, 5% avg tax) after each
bootstrap. A soft penalty of GAS_PENALTY_FACTOR (1e13 wei/gas) is
subtracted from total fitness before the JSON score line is emitted.
Leaner programs win ties; gas_used is included in the output for
observability. At ~15k gas (current seed) the penalty is ~1.5e17 wei;
at the 200k hard cap boundary it reaches ~2e18 wei.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
SPDX license:
- Restore GPL-3.0-or-later SPDX header to DeployBase.sol (removed by
the em-dash sed fix in an earlier commit).
SeedSwapper deduplication:
- Extract SeedSwapper into onchain/script/DeployCommon.sol — a single
canonical definition shared by both deploy scripts. This eliminates
duplicate Foundry artifacts (previously both DeployLocal.sol and
DeployBase.sol produced a SeedSwapper artifact, causing ambiguity for
verification and coverage tools).
- Remove inline SeedSwapper and redundant IWETH9 import from
DeployLocal.sol and DeployBase.sol; add `import "./DeployCommon.sol"`.
SeedSwapper hardening (in DeployCommon.sol):
- Replace magic-literal price sentinels with named constants
SQRT_PRICE_LIMIT_MIN / SQRT_PRICE_LIMIT_MAX.
- Wrap both weth.transfer() calls with require() so a non-standard
WETH9 false-return is caught rather than silently ignored.
- Add post-swap WETH sweep in executeSeedBuy(): if the price limit is
reached before the full input is spent, the residual WETH balance is
returned to `recipient` instead of being stranded in the contract.
bootstrap-common.sh:
- Normalise cumulativeVolume output through `cast to-dec` before the
string comparison, guarding against a future change in cast output
format (decimal vs hex).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The 0.01 ETH seed swap only moved the tick 127 ticks from the start
and 37 ticks from the ANCHOR center — far below the 400-tick minimum
amplitude (2 × TICK_SPACING). As a result, the second recenter()
always reverted with "amplitude not reached", preventing VWAP bootstrap.
Root cause: SEED_SWAP_ETH was 1 % of SEED_LM_ETH. The ANCHOR
position holds ~25 % of SEED_LM_ETH as WETH across ~7 200 ticks, so
consuming half of that WETH (≈0.125 ETH) is already enough to move
the price 3 600 ticks past centre.
Fix: raise SEED_SWAP_ETH from 0.01 ether to 0.5 ether (50 % of
SEED_LM_ETH), giving a 4× margin over the minimum required. Verified
against a Base-Sepolia fork at block 20 000 000 (same environment as
CI): VWAP is now bootstrapped and cumulativeVolume > 0 after deployment.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
run_forge_script() was piping all output to LOG_FILE (which is /dev/null
in CI), so forge failures were completely silent. Capture output to a
temp file and print to stderr on failure so the CI log shows the actual
error message.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adding SeedSwapper alongside DeployLocal in the same .sol file caused
forge to error "Multiple contracts in the target path" when no --tc flag
was specified, silently failing the CI bootstrap step.
Add --tc DeployLocal to all forge script invocations of DeployLocal.sol:
- scripts/bootstrap-common.sh (CI / local bootstrap)
- tools/deploy-optimizer.sh (manual deploy tool)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
DeployLocal.sol now calls recenter() twice during the VWAP bootstrap
sequence (issue #567 fix). The second recenter leaves ANCHOR positions
at the post-seed-buy tick, so the CI bootstrap's subsequent call_recenter()
failed with "amplitude not reached" (currentTick == anchorCenterTick,
amplitude = 0 < 400).
Fix: before calling recenter(), check cumulativeVolume(). If it is
already > 0, the deploy script has placed positions and bootstrapped
VWAP -- skip the redundant recenter rather than failing.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Deploy scripts (DeployLocal.sol and DeployBase.sol) now execute a
seed buy + double-recenter sequence before handing control to users:
1. Temporarily grant deployer recenterAccess (via self as feeDestination)
2. Fund LM with a small amount and call recenter() -> places thin positions
3. SeedSwapper executes a small buy, generating a non-zero WETH fee
4. Second recenter() hits the cumulativeVolume==0 bootstrap path with
ethFee>0 -> _recordVolumeAndPrice fires -> cumulativeVolume>0
5. Revoke recenterAccess and restore the real feeDestination
After deployment, cumulativeVolume>0, so the bootstrap path is
unreachable by external users and cannot be front-run by an attacker
inflating the initial VWAP anchor with a whale buy.
Also adds:
- tools/deploy-optimizer.sh: verification step checks cumulativeVolume>0
after a fresh local deployment
- test_vwapBootstrappedBySeedTrade() in VWAPFloorProtection.t.sol:
confirms the deploy sequence (recenter + buy + recenter) leaves
cumulativeVolume>0 and getVWAP()>0
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Skip UUPS upgradeTo: etch + vm.store ERC1967 implementation slot directly
(OptimizerV3Push3 is standalone, no UUPS inheritance needed for evolution)
- Use deployedBytecode (runtime) instead of bytecode (creation) for vm.etch
- Inject transpiled body into OptimizerV3.sol (has getLiquidityParams via Optimizer)
instead of using standalone OptimizerV3Push3.sol
- Wrap buy/sell/stake/unstake in try/catch — attack ops should not abort the batch
- Add /tmp read to fs_permissions for batch-eval manifest files
- Bootstrap recenter returns bool instead of reverting (soft-fail per candidate)
Remove unreachable else branch in VWAP recording logic. The branch was
only reachable if lastRecenterTick==0 and cumulativeVolume>0, which
requires tick==0 on the very first recenter — virtually impossible on a
live pool. Collapse else-if into else and delete the corresponding
testVWAPElseBranch test that exercised the path via vm.store.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Fix the @return NatSpec for recenter() isUp: the previous description
was wrong for the token0=WETH ordering (claimed tick above center, but
the actual check is currentTick < centerTick when token0isWeth). The
correct invariant is isUp=true ↔ KRK price in ETH rose (buy event /
net ETH inflow), regardless of token ordering.
Also address review nit: StrategyExecutor._logRecenter() now logs
'direction=BOOTSTRAP' instead of 'direction=DOWN' when no anchor
position existed before the recenter (aLiqPre==0), eliminating the
misleading directional label on the first recenter.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add NatSpec to recenter() documenting that the function always reverts
on failure (never silently returns false), listing all four revert
conditions, and clarifying that both true/false return values represent
a successfully-executed recenter with the value indicating price
direction (up vs down relative to previous anchor centre).
Also fix StrategyExecutor.maybeRecenter() to capture the isUp return
value from lm.recenter() and include it in the log output, making
price direction visible in backtesting replays.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- LiquidityManager.setFeeDestination: add CREATE2 bypass guard — also
blocks re-assignment when the current feeDestination has since acquired
bytecode (was a plain address when set, contract deployed to it later)
- LiquidityManager.setFeeDestination: expand NatSpec to document the
EOA-mutability trade-off and the CREATE2 guard explicitly
- Test: add testSetFeeDestinationEOAToContract_Locks covering the
realistic EOA→contract transition (the primary lock-activation path)
- red-team.sh: add comment that DEPLOYER_PK is Anvil account-0 and must
only be used against a local ephemeral Anvil instance
- ARCHITECTURE.md: document feeDestination conditional-lock semantics and
contrast with Kraiken's strictly set-once liquidityManager/stakingPool
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add `feeDestinationLocked` bool to LiquidityManager
- Replace one-shot setter with conditional trapdoor: EOAs may be set
repeatedly, but setting a contract address locks permanently
- Remove `AddressAlreadySet` error (superseded by the new lock mechanic)
- Replace fragile SLOT7 storage hack in red-team.sh with a proper
`setFeeDestination()` call using the deployer key
- Update tests: replace AddressAlreadySet test with three new tests
covering EOA multi-set, contract lock, and locked revert
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add require(mantissa >= 0) guards in calculateParams before the uint256()
casts on inputs[0] and inputs[1], preventing negative int256 values from
wrapping to huge uint256 numbers and corrupting liquidity calculations.
Add two regression tests covering the revert paths for both slots.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reviewer noted that `< 4` only catches underflow; programs leaving 5+
values on the DYADIC stack silently passed isValid(). Change the guard
to `!== 4` so both under- and overflow are rejected, matching the
documented 'exactly 4 outputs' contract.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace silent ?? '0' fallbacks with an explicit length check that
throws when the DYADIC stack holds fewer than 4 values at program
termination. isValid() in the evolution pipeline now correctly
rejects underflow programs instead of silently scoring them as valid
with zeroed outputs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add `buy_recenter_loop` batch op to AttackRunner — executes N×(buy→recenter)
cycles in a single Solidity loop, emitting snapshots after each recenter.
Rewrite il-crystallization-80.jsonl from 153 individual JSONL steps to 2 lines
using the new op with count=80, matching the intended attack name. Also corrects
the cycle count from 76 (previous file) to the intended 80.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
