Move the orphaned NatSpec block (originally for calculateParams) from
above getLiquidityParams to directly precede calculateParams, and give
getLiquidityParams only its own @inheritdoc block.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Optimizer: add `is IOptimizer` and mark getLiquidityParams() with
`override`, making the interface conformance explicit at the base level.
OptimizerV3 inherits it transitively via Optimizer.
- OptimizerV3Push3: add `is IOptimizer` and implement getLiquidityParams()
that calls calculateParams() with zeroed inputs, returning bear-mode
defaults (ci=0, anchorShare=0.3e18, anchorWidth=100, discoveryDepth=0.3e18).
Behaviour is identical to the previous try/catch fallback used by
LiquidityManager and the backtesting deployer.
- Update backtesting comments to reflect that getLiquidityParams() now
exists on OptimizerV3Push3 (returns bear defaults via zeroed inputs).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace 0x27F971cb582BF9E50F397e4d29a5C7A34f11faA2 (Base Sepolia
NonfungiblePositionManager) with the correct Base mainnet address
0x03a520B32c04bf3beef7BEb72E919cF822Ed34F3 in all four files that
referenced it, and add an inline comment citing the chain and source.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Extract magic number into named constant MAX_ANCHOR_WIDTH = 100 in LiquidityManager.sol
- Document effective ceiling in IOptimizer.sol natspec for anchorWidth return value
- Add testAnchorWidthAbove100IsClamped in LiquidityManager.t.sol asserting that
optimizer-returned anchorWidth=150 is silently clamped to 100 (not rejected)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace _positionEthValue() with _positionEthOnly() in FitnessEvaluator.t.sol.
The new function returns only the WETH component of each position (amount0 if
token0isWeth, else amount1), ignoring KRK token value entirely. This prevents
evolution from gaming the fitness metric by inflating KRK price through position
placement — the score now reflects actual ETH reserves only.
Also removes the now-unused FullMath import.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add IOptimizer interface with getLiquidityParams() signature to IOptimizer.sol
so upgrade-compatibility is explicit and static analysis can catch ABI mismatches.
Update LiquidityManager to hold optimizer as IOptimizer instead of concrete Optimizer.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Fixes#635
## Changes
The implementation is complete and committed. All 211 tests pass.
## Summary of changes
### `onchain/src/Optimizer.sol`
- **Replaced raw slot inputs** with normalized indicators in `getLiquidityParams()`:
- Slot 2 `pricePosition`: where current price sits within VWAP ± 11 000 ticks (0 = lower bound, 0.5e18 = at VWAP, 1e18 = upper bound)
- Slot 3 `volatility`: `|shortTwap − longTwap| / 1000 ticks`, capped at 1e18
- Slot 4 `momentum`: 0 = falling, 0.5e18 = flat, 1e18 = rising (5-min vs 30-min TWAP delta)
- Slot 5 `timeSinceRecenter`: `elapsed / 86400s`, capped at 1e18
- Slot 6 `utilizationRate`: 1e18 if current tick is within anchor position range, else 0
- **Extended `setDataSources()`** to accept `liquidityManager` + `token0isWeth` (needed for correct tick direction in momentum/utilizationRate)
- **Added `_vwapToTick()`** helper: converts `vwapX96 = price × 2⁹⁶` to tick via `sqrt(vwapX96) << 48`, with TickMath bounds clamping
- All slots gracefully default to 0 when data sources are unconfigured or TWAP history is insufficient (try/catch on `pool.observe()`)
### `onchain/src/OptimizerV3Push3.sol`
- Updated NatSpec to document the new `[0, 1e18]` slot semantics
### New tests (`onchain/test/`)
- `OptimizerNormalizedInputsTest`: 18 tests covering all new slots, token ordering, TWAP fallback, and a bounded fuzz test
- `mocks/MockPool.sol`: configurable `slot0()` + `observe()` with TWAP tick math
- `mocks/MockLiquidityManagerPositions.sol`: configurable anchor position bounds
Co-authored-by: openhands <openhands@all-hands.dev>
Reviewed-on: https://codeberg.org/johba/harb/pulls/649
Reviewed-by: review_bot <review_bot@noreply.codeberg.org>
Three defensive layers so every Push3 program runs without reverting:
Layer A (transpiler/index.ts): assign bear defaults (CI=0, AS=0.3e18,
AW=100, DD=0.3e18) to all four outputs at the top of calculateParams.
Any output the evolved program does not overwrite keeps the safe default.
Layer B (transpiler/transpiler.ts): graceful stack underflow — dpop/bpop
return '0'/'false' instead of throwing, and the final output-pop falls
back to bear-default literals when fewer than 4 values remain on the
stack. Wrong output count no longer aborts transpilation.
Layer C (transpiler/transpiler.ts + index.ts): wrap the entire function
body in `unchecked {}` so integer overflow wraps (matching Push3), and
emit `(b == 0 ? 0 : a / b)` for every DYADIC./ (div-by-zero → 0,
matching Push3 no-op semantics).
Layer 2 (Optimizer.sol getLiquidityParams): clamp the three fraction
outputs (capitalInefficiency, anchorShare, discoveryDepth) to [0, 1e18]
after abi.decode so a buggy evolved program cannot produce out-of-range
values even if it runs without reverting.
Regenerated OptimizerV3Push3.sol with the updated transpiler; all 193
tests pass (34 Optimizer/OptimizerV3Push3 tests explicitly).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Optimizer.sol: move CALCULATE_PARAMS_GAS_LIMIT constant to top of
contract (after error declaration) to avoid mid-contract placement.
Expand natspec with EIP-150 63/64 note: callers need ~203 175 gas to
deliver the full 200 000 budget to the inner staticcall.
- Optimizer.sol: add ret.length < 128 guard before abi.decode in
getLiquidityParams(). Malformed return data (truncated / wrong ABI)
from an evolved program now falls back to _bearDefaults() instead of
propagating an unhandled revert. The 128-byte minimum is the ABI
encoding of (uint256, uint256, uint24, uint256) — four 32-byte slots.
- Optimizer.sol: add cross-reference comment to _bearDefaults() noting
that its values must stay in sync with LiquidityManager.recenter()'s
catch block to prevent silent divergence.
- FitnessEvaluator.t.sol: add CALCULATE_PARAMS_GAS_LIMIT mirror constant
(must match Optimizer.sol). Disqualify candidates whose measured gas
exceeds the production cap with fitness=0 and error="gas_over_limit"
— prevents the pipeline from selecting programs that are functionally
dead on-chain (would always produce bear defaults in production).
- batch-eval.sh: update output format comment to document the gas_used
field and over-gas-limit error object added by this feature.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Optimizer.getLiquidityParams() now forwards calculateParams through a
staticcall capped at 200 000 gas. Programs that exceed the budget or
revert fall back to bear defaults (CI=0, AS=30%, AW=100, DD=0.3e18),
so a bloated evolved optimizer can never OOG-revert inside recenter().
- FitnessEvaluator.t.sol measures gas used by calculateParams against
fixed representative inputs (50% staked, 5% avg tax) after each
bootstrap. A soft penalty of GAS_PENALTY_FACTOR (1e13 wei/gas) is
subtracted from total fitness before the JSON score line is emitted.
Leaner programs win ties; gas_used is included in the output for
observability. At ~15k gas (current seed) the penalty is ~1.5e17 wei;
at the 200k hard cap boundary it reaches ~2e18 wei.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
SPDX license:
- Restore GPL-3.0-or-later SPDX header to DeployBase.sol (removed by
the em-dash sed fix in an earlier commit).
SeedSwapper deduplication:
- Extract SeedSwapper into onchain/script/DeployCommon.sol — a single
canonical definition shared by both deploy scripts. This eliminates
duplicate Foundry artifacts (previously both DeployLocal.sol and
DeployBase.sol produced a SeedSwapper artifact, causing ambiguity for
verification and coverage tools).
- Remove inline SeedSwapper and redundant IWETH9 import from
DeployLocal.sol and DeployBase.sol; add `import "./DeployCommon.sol"`.
SeedSwapper hardening (in DeployCommon.sol):
- Replace magic-literal price sentinels with named constants
SQRT_PRICE_LIMIT_MIN / SQRT_PRICE_LIMIT_MAX.
- Wrap both weth.transfer() calls with require() so a non-standard
WETH9 false-return is caught rather than silently ignored.
- Add post-swap WETH sweep in executeSeedBuy(): if the price limit is
reached before the full input is spent, the residual WETH balance is
returned to `recipient` instead of being stranded in the contract.
bootstrap-common.sh:
- Normalise cumulativeVolume output through `cast to-dec` before the
string comparison, guarding against a future change in cast output
format (decimal vs hex).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The 0.01 ETH seed swap only moved the tick 127 ticks from the start
and 37 ticks from the ANCHOR center — far below the 400-tick minimum
amplitude (2 × TICK_SPACING). As a result, the second recenter()
always reverted with "amplitude not reached", preventing VWAP bootstrap.
Root cause: SEED_SWAP_ETH was 1 % of SEED_LM_ETH. The ANCHOR
position holds ~25 % of SEED_LM_ETH as WETH across ~7 200 ticks, so
consuming half of that WETH (≈0.125 ETH) is already enough to move
the price 3 600 ticks past centre.
Fix: raise SEED_SWAP_ETH from 0.01 ether to 0.5 ether (50 % of
SEED_LM_ETH), giving a 4× margin over the minimum required. Verified
against a Base-Sepolia fork at block 20 000 000 (same environment as
CI): VWAP is now bootstrapped and cumulativeVolume > 0 after deployment.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Deploy scripts (DeployLocal.sol and DeployBase.sol) now execute a
seed buy + double-recenter sequence before handing control to users:
1. Temporarily grant deployer recenterAccess (via self as feeDestination)
2. Fund LM with a small amount and call recenter() -> places thin positions
3. SeedSwapper executes a small buy, generating a non-zero WETH fee
4. Second recenter() hits the cumulativeVolume==0 bootstrap path with
ethFee>0 -> _recordVolumeAndPrice fires -> cumulativeVolume>0
5. Revoke recenterAccess and restore the real feeDestination
After deployment, cumulativeVolume>0, so the bootstrap path is
unreachable by external users and cannot be front-run by an attacker
inflating the initial VWAP anchor with a whale buy.
Also adds:
- tools/deploy-optimizer.sh: verification step checks cumulativeVolume>0
after a fresh local deployment
- test_vwapBootstrappedBySeedTrade() in VWAPFloorProtection.t.sol:
confirms the deploy sequence (recenter + buy + recenter) leaves
cumulativeVolume>0 and getVWAP()>0
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Skip UUPS upgradeTo: etch + vm.store ERC1967 implementation slot directly
(OptimizerV3Push3 is standalone, no UUPS inheritance needed for evolution)
- Use deployedBytecode (runtime) instead of bytecode (creation) for vm.etch
- Inject transpiled body into OptimizerV3.sol (has getLiquidityParams via Optimizer)
instead of using standalone OptimizerV3Push3.sol
- Wrap buy/sell/stake/unstake in try/catch — attack ops should not abort the batch
- Add /tmp read to fs_permissions for batch-eval manifest files
- Bootstrap recenter returns bool instead of reverting (soft-fail per candidate)
Remove unreachable else branch in VWAP recording logic. The branch was
only reachable if lastRecenterTick==0 and cumulativeVolume>0, which
requires tick==0 on the very first recenter — virtually impossible on a
live pool. Collapse else-if into else and delete the corresponding
testVWAPElseBranch test that exercised the path via vm.store.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Fix the @return NatSpec for recenter() isUp: the previous description
was wrong for the token0=WETH ordering (claimed tick above center, but
the actual check is currentTick < centerTick when token0isWeth). The
correct invariant is isUp=true ↔ KRK price in ETH rose (buy event /
net ETH inflow), regardless of token ordering.
Also address review nit: StrategyExecutor._logRecenter() now logs
'direction=BOOTSTRAP' instead of 'direction=DOWN' when no anchor
position existed before the recenter (aLiqPre==0), eliminating the
misleading directional label on the first recenter.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add NatSpec to recenter() documenting that the function always reverts
on failure (never silently returns false), listing all four revert
conditions, and clarifying that both true/false return values represent
a successfully-executed recenter with the value indicating price
direction (up vs down relative to previous anchor centre).
Also fix StrategyExecutor.maybeRecenter() to capture the isUp return
value from lm.recenter() and include it in the log output, making
price direction visible in backtesting replays.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- LiquidityManager.setFeeDestination: add CREATE2 bypass guard — also
blocks re-assignment when the current feeDestination has since acquired
bytecode (was a plain address when set, contract deployed to it later)
- LiquidityManager.setFeeDestination: expand NatSpec to document the
EOA-mutability trade-off and the CREATE2 guard explicitly
- Test: add testSetFeeDestinationEOAToContract_Locks covering the
realistic EOA→contract transition (the primary lock-activation path)
- red-team.sh: add comment that DEPLOYER_PK is Anvil account-0 and must
only be used against a local ephemeral Anvil instance
- ARCHITECTURE.md: document feeDestination conditional-lock semantics and
contrast with Kraiken's strictly set-once liquidityManager/stakingPool
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add `feeDestinationLocked` bool to LiquidityManager
- Replace one-shot setter with conditional trapdoor: EOAs may be set
repeatedly, but setting a contract address locks permanently
- Remove `AddressAlreadySet` error (superseded by the new lock mechanic)
- Replace fragile SLOT7 storage hack in red-team.sh with a proper
`setFeeDestination()` call using the deployer key
- Update tests: replace AddressAlreadySet test with three new tests
covering EOA multi-set, contract lock, and locked revert
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add require(mantissa >= 0) guards in calculateParams before the uint256()
casts on inputs[0] and inputs[1], preventing negative int256 values from
wrapping to huge uint256 numbers and corrupting liquidity calculations.
Add two regression tests covering the revert paths for both slots.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add `buy_recenter_loop` batch op to AttackRunner — executes N×(buy→recenter)
cycles in a single Solidity loop, emitting snapshots after each recenter.
Rewrite il-crystallization-80.jsonl from 153 individual JSONL steps to 2 lines
using the new op with count=80, matching the intended attack name. Also corrects
the cycle count from 76 (previous file) to the intended 80.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Wrap upgradeTo() in try/catch: malformed candidate bytecode no longer
aborts the entire batch; emit {"fitness":0,"error":"upgrade_failed"} and
continue to the next candidate
- Bootstrap recenter: require() after 5 retry attempts so silent failure
(all scores identically equal to free WETH only) is surfaced as a hard
test failure rather than silently producing meaningless results
- mint_lp: capture the NPM tokenId returned by mint() and push it to
_mintedNpmTokenIds; burn_lp now uses a 1-based index into that array
(same pattern as stake/unstake), making attack files fork-block-independent
- Remove dead atkBaseSnap variable and its compiler-warning suppression
- Remove orphaned vm.snapshot() after vm.revertTo() in the attack loop
- Fix misleading comment on delete _stakedPositionIds
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace per-candidate Anvil+forge-script pipeline with in-process EVM
execution using Foundry's native revm backend, achieving 10-100× speedup
for evolutionary search at scale.
New files:
- onchain/test/FitnessEvaluator.t.sol — Forge test that forks Base once,
deploys the full KRAIKEN stack, then for each candidate uses vm.etch to
inject the compiled optimizer bytecode, UUPS-upgrades the proxy, runs all
attack sequences with in-memory vm.snapshot/revertTo (no RPC overhead),
and emits one {"candidate_id","fitness"} JSON line per candidate.
Skips gracefully when BASE_RPC_URL is unset (CI-safe).
- tools/push3-evolution/revm-evaluator/batch-eval.sh — Wrapper that
transpiles+compiles each candidate sequentially, writes a two-file
manifest (ids.txt + bytecodes.txt), then invokes FitnessEvaluator.t.sol
in a single forge test run and parses the score JSON from stdout.
Modified:
- tools/push3-evolution/evolve.sh — Adds EVAL_MODE env var (anvil|revm).
When EVAL_MODE=revm, batch-scores every candidate in a generation with
one batch-eval.sh call instead of N sequential fitness.sh processes;
scores are looked up from the JSONL output in the per-candidate loop.
Default remains EVAL_MODE=anvil for backward compatibility.
Key design decisions:
- Per-candidate Solidity compilation is unavoidable (each Push3 candidate
produces different Solidity); the speedup is in the evaluation phase.
- vm.snapshot/revertTo in forge test are O(1) memory operations (true
revm), not RPC calls — this is the core speedup vs Anvil.
- recenterAccess is set in bootstrap so TWAP stability checks are bypassed
during attack sequences (mirrors the existing fitness.sh bootstrap).
- Test skips cleanly when BASE_RPC_URL is absent, keeping CI green.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace pool.observe() TWAP price source with current pool tick (pool.slot0()) sampled once per recenter
- Remove _getTWAPOrFallback() and TWAPFallback event (added by PR #575)
- _scrapePositions now takes int24 currentTick instead of uint256 prevTimestamp; price computed via _priceAtTick before the burn loop
- Volume weighting (ethFee * 100) is unchanged — fees proxy swap volume over the recenter interval
- Direction fix from #566 (shouldRecordVWAP only on sell events) is preserved
- Remove test_twapReflectsAveragePriceNotJustLastSwap (tested reverted TWAP behaviour)
- ORACLE_CARDINALITY / increaseObservationCardinalityNext retained for _isPriceStable()
- All 188 tests pass
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
After a buy→sell round-trip the net price movement is near zero, so
recenter() reverts with "amplitude not reached" and aborts the whole
AttackRunner script.
Wrap the recenter() call in a try/catch so amplitude failures are
caught and logged as a skipped step rather than propagating as a fatal
revert. When recenter is skipped, no state snapshot is emitted and the
attack sequence continues — matching the intended semantics: round-trip
trading should not cause the fitness scorer to crash.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Stake.nextPositionId starts at 654_321, so attack files cannot use literal
on-chain IDs (e.g. positionId=1 always reverts with PositionNotFound).
Fix AttackRunner to treat the JSONL positionId field as a 1-based index into
the list of positions created by stake ops during the current run:
- Add IStake.snatch returns (uint256) to the interface so the returned ID is
captured.
- Track returned IDs in _stakedPositionIds[] (inserted in creation order).
- _executeUnstake resolves positionId to _stakedPositionIds[positionId-1]
before calling exitPosition, matching the natural "unstake position 1"
semantics in the attack DSL.
KRK approval for Stake was already present in _setup(); no other changes needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add virtual to Optimizer.calculateParams() for UUPS override
- Create OptimizerV3.sol: UUPS-upgradeable optimizer with transpiled Push3 logic
- Update deploy-optimizer.sh to deploy OptimizerV3 instead of Optimizer
- Add ~/.foundry/bin to PATH in evolve.sh, fitness.sh, deploy-optimizer.sh
- **Bug**: Fix JSON malformation in _snapshotPositions — closing literal was '"}}}' (three
braces) but only '"}}' is needed (close discovery{} + positions{}). The third brace
prematurely closed the root object, making every snapshot unparseable downstream.
- **Nit**: _executeStake local variable renamed taxRateIndex → taxRate to match the
IStake interface and Stake.sol. JSONL field key '.taxRateIndex' is kept for backward
compatibility with existing attack files; the comment and NatDoc header now say so.
- **Nit**: recenter_is_up now emits JSON null (not false) before the first recenter call,
via a new _hasRecentered flag. Downstream parsers can distinguish "no recenter yet"
from "last recenter moved price down" (false). _hasRecentered is set to true alongside
_lastRecenterIsUp in the recenter handler.
- **Nit**: Added a comment to _logSnapshot explaining that pool.slot0() is a view call
and forge-std finalises broadcast state before executing it, so tick/sqrtPrice are
always post-broadcast accurate.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- **Bug**: `_positionEthValue` now sums both the ETH component and the KRK component
(converted to ETH via `FullMath.mulDiv` at current sqrtPriceX96) so `lm_eth_total`
correctly reflects LM TVL for all price ranges (below/in/above range).
- **Bug**: `recenter()` return value (`bool isUp` — price direction) is now captured in
`_lastRecenterIsUp` state variable and emitted as `"recenter_is_up"` in every snapshot.
Note: `recenter()` reverts on failure; `false` means price moved *down*, not a no-op.
- **Bug**: Discovery position now emits `"ethValue"` in its snapshot JSON object,
matching the floor and anchor fields for symmetric automated parsing.
- **Warning**: `IStake.snatch` interface parameter renamed `taxRateIndex` → `taxRate` to
match the actual `Stake.sol` signature (the value is a raw rate, not a lookup index).
- **Warning**: Unknown op codes in the JSONL file now emit a `console.log` warning
instead of silently skipping, catching typos in attack sequences.
- **Nit**: `_setup()` now wraps 9 000 ETH (up from 1 000) to cover heavy buy sequences
that would otherwise exhaust the adversary's WETH.
- **Nit**: `_computeVwapTick` documents the int128 overflow guard and its tick=0 sentinel
meaning so callers can distinguish "VWAP unavailable" from tick zero.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Fix unsafe int32 intermediate cast: int56(int32(elapsed)) → int56(uint56(elapsed))
to prevent TWAP tick sign inversion for intervals above int32 max (~68 years)
- Remove redundant lastRecenterTimestamp state variable; capture prevTimestamp
from existing lastRecenterTime instead (saves ~20k gas per recenter)
- Use pool.increaseObservationCardinalityNext(ORACLE_CARDINALITY) in constructor
instead of recomputing the pool address; extract magic 100 to named constant
- Add TWAPFallback(uint32 elapsed) event emitted when pool.observe() reverts
so monitoring can distinguish degraded operation from normal bootstrap
- Remove conditional bypass paths in test_twapReflectsAveragePriceNotJustLastSwap;
assert vwapAfter > 0 and vwapAfter > initialPriceX96 unconditionally
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add lastRecenterTimestamp to track recenter interval for TWAP
- Increase pool observation cardinality to 100 in constructor
- In _scrapePositions, use pool.observe([elapsed, 0]) to get TWAP tick
over the full interval between recenters; falls back to anchor midpoint
when elapsed==0 or pool.observe() reverts (insufficient history)
- Add test_twapReflectsAveragePriceNotJustLastSwap: verifies TWAP-based
VWAP reflects the average price across the recenter interval, not just
the last-swap anchor snapshot
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace the ethPerToken metric (free balance / adjusted supply) with total
LM ETH (free + WETH + position-locked) using a forge script with exact
Uni V3 integer math. Collapses 4+ RPC calls and Python float approximation
into a single forge script call using LiquidityAmounts + TickMath.
Also updates red-team prompt, report format, memory extraction, and adds
roadmap items for #536-#538 (backtesting pipeline, Push3 evolution).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- _scrapePositions natspec: 'ETH inflow' → 'ETH outflow / price fell or at bootstrap'
- Inline comment above VWAP block: remove inverted 'KRK sold out / ETH inflow' rationale,
replace with a neutral forward-reference to recenter() where the direction logic lives
- VWAPFloorProtection.t.sol: remove unused Kraiken and forge-std/Test.sol imports
(both are already provided by UniSwapHelper)
- test_floorConservativeAfterBuyOnlyAttack: add assertFalse(token0isWeth) guard so a
future change to the setUp parameter cannot silently invert the gap-direction assertion
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Investigation findings:
- VWAP WAS being fed during buy-only cycles (shouldRecordVWAP = true on ETH inflow / price rising).
Over 80 buy-recenter cycles VWAP converged toward the inflated current price.
- When VWAP ≈ currentTick, mirrorTick = currentTick + vwapDistance ≈ currentTick, placing
the floor near the inflated price. Adversary sells back through the high floor, extracting
nearly all LM ETH.
- Optimizer parameters (anchorShare, CI) were not the primary cause.
Fix (LiquidityManager.sol):
Flip shouldRecordVWAP from buy direction to sell direction. VWAP is now recorded only when
price falls (ETH outflow / sell events) or at initial bootstrap (cumulativeVolume == 0).
Buy-only attack cycles leave VWAP frozen at the historical baseline, keeping mirrorTick and
the floor conservatively anchored far from the inflated current price.
Also updated onchain/AGENTS.md to document the corrected recording direction.
Regression test (VWAPFloorProtection.t.sol):
- test_vwapNotInflatedByBuyOnlyAttack: asserts getVWAP() stays at bootstrap after N buy cycles.
- test_floorConservativeAfterBuyOnlyAttack: asserts floor center is far below inflated tick.
- test_vwapBootstrapsOnFirstFeeEvent: confirms bootstrap path unchanged.
- test_recenterSucceedsOnSellDirectionWithoutReverts: confirms sell-direction recenters work.
All 187 tests pass.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add AttackRunner.s.sol: structured forge script that reads attack ops from a
JSONL file (ATTACK_FILE env), executes them against the local Anvil deployment,
and emits full state snapshots (tick, positions, VWAP, optimizer output,
adversary balances) as JSON lines after every recenter and at start/end.
- Add 5 canonical attack files in onchain/script/backtesting/attacks/:
* il-crystallization-15.jsonl — 15 buy-recenter cycles + sell (extraction)
* il-crystallization-80.jsonl — 80 buy-recenter cycles + sell (extraction)
* fee-drain-oscillation.jsonl — buy-recenter-sell-recenter oscillation
* round-trip-safe.jsonl — 20 full round-trips (regression: safe)
* staking-safe.jsonl — staking manipulation (regression: safe)
- Add scripts/harb-evaluator/export-attacks.py: parses red-team-stream.jsonl
for tool_use Bash blocks containing cast send commands and converts them to
AttackRunner-compatible JSONL (buy/sell/recenter/stake/unstake/mint_lp/burn_lp).
- Update scripts/harb-evaluator/red-team.sh: after each agent run, automatically
exports the attack sequence via export-attacks.py and replays it with
AttackRunner to capture structured snapshots in tmp/red-team-snapshots.jsonl.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When feeDestination == address(this), _scrapePositions() now skips the
fee safeTransfer calls so collected WETH/KRK stays in the LM balance
and is redeployed as liquidity on the next _setPositions() call.
Also fixes _getOutstandingSupply(): kraiken.outstandingSupply() already
subtracts balanceOf(liquidityManager), so when feeDestination IS the LM
the old code double-subtracted LM-held KRK, causing an arithmetic
underflow once positions were scraped. The subtraction is now skipped
for the self-referencing case.
VWAP recording is refactored to a single unconditional block so it fires
regardless of fee destination.
New test testSelfFeeDestination_FeesAccrueAsLiquidity() demonstrates
that a two-recenter cycle with self-feeDestination completes without
underflow and without leaking WETH to any external address.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
